147mm 5.8" Rear Travel - 160mm 6.3" Front Travel 29" Wheels - Up to 2.6" tires
Shred and climb.
What if Ibis took everybody’s favorite bike. enduro-mtb mag's trail bike of the year two years on the trot, and made it a little slacker and little longer? Hell, what if they made it more progressive and coil compatible? And that’s exactly what Ibis did for the Ripmo V2. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
The Ripmo and Ripmo AF share the same steep, 76-degree seat tube angle and a rangy but not stratospheric reach, which places riders centrally over the pedals. It makes for an efficient position that can go the long haul. The slack 64.9 headtube angle and 44mm reduced-off set fork doesn’t wander while climbing, and doesn’t hold you back descending. It works — all day up, all day down, all day in between.
Ibis' custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through terrain like a trophy truck storming through a set of whoops.
The Ripmo V2 is compatible with both coil and air shocks due to a more progressive leverage rate. On the trail, it gives the suspension a supple feel through out the entirety of the stroke, enhancing traction no matter how deep you dig.
DROPPER POST CLEARANCE
Mo’ dropper, mo’ better. On small frames, you can run 125 – 150mm, pending your preference and inseam length. On medium, large and extra large, a 160mm — or, why not run a 185mm? Ibis' shorter seat-tube lengths and low standovers allow you to choose your size based on your reach preference.
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, know that you’re not limited by width.
Tired of hitting “purchase” on another set of bearings each season? So were Ibis. That’s why they use bushings where they make sense, and bearings where they don’t. The IGUS bushings in their lower link are lighter, stiffer, and virtually maintenance free. Ibis believe so strongly in them, they back them with a free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON FOR EVERYONE
All Ibis bikes are built from the highest grade materials and optimized for the best strength, weight, stiff ness, and ride performance — no matter how much you spend. The Ripmo weighs a svelte 6.25 lbs with a DPX2 shock and complete builds start at 28 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside, should look pretty on the inside. Ibis use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
REMOVABLE ISCG MOUNT
So, you’re too fast for narrow-wide chain retention on its own? Challenge accepted. Ibis' removable ISCG tabs allow shredders to bolt on a chain guide, while the rest of us can shave grams.
PROTECT YOUR INVESTMENT
A polycarbonate downtube protector deflects debris, while molded rubber swing arm protectors keep things quiet and clean. And Ibis' simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
Custom Build your own Ripmo here on the Bike Builder
Wheel Size: 29” / up to 2.6" tyres
Front Travel: 160mm
Rear Travel: 147mm
Boost Axles: 148mm rear / 110mm front
Seatpost Diameter: 31.6mm
Rear Brake: Post mount / 203mm max rotor
Chainstay Length: 435mm
Bottom Bracket: Threaded (73mm English threaded)
ISCG 05 Compatible: Optional removable adapter
Tapered Headtube: ZS44 upper / ZS56 lower
Colours: Bug Zapper Blue or Star Destroyer Grey
Sizes: S / M / L / XL
Frame Warranty: 7 years