Nukeproof Megawatt Comp - Bullet Grey - Medium - Last One

Introducing the Megawatt: A Mega with a motor. Designed so you can maximise the amount of time spent descending by getting you back to the top faster, again and again (and again).

Designed and developed from the outset alongside the latest Mega, the Nukeproof Megawatt retains the descending characteristics that has taken 4 Enduro World Series crowns but combines this with the latest Shimano Steps EP8 motor technology. The Megawatt Shares the race proven geometry of the Nukeproof Mega, but in an all new mixed wheel size platform. The 29” wheel up front, maximises grip and rolling efficiency whilst the 27.5” wheel out back, allows the bike to run shorter chainstays to ensure nimble handling and maximise manoeuvrability. The rear chainstays also benefit from 3d moulded chain guard to keep the frame protected and running quiet allowing you to concentrate on the trail ahead. The Megawatt is offered in Size Small through to XXL and shares Nukeproof’s “saddle offset” philosophy with the Mega. This means steeper seat angles as sizes increase, to optimise the riding position and maximise comfort and efficiency.

A custom tuned rear shock (170mm of rear travel) on all models ensures that the Megawatt is super supple of the top whilst remaining progressive and supportive through the rest of the travel. The Anti Squat too is optimised to create a bike that offers ultimate performance on the descends and then returns you back to the top efficiently for more. The new Mega also has a wide SAG range (30%-35%) to allow you; the rider, to tune the characteristics of the bike to your preferences.

The Megawatt was designed from the outset to optimise the performance of the Shimano EP8 Motor and battery. Crafted from hydroformed 6061 aluminium, the Megawatt shares some characteristics and tube shapes with its Mega sibling but features several notable differences. An all-new one-piece cast Bottom Bracket shell has been engineered to house the Shimano Steps EP8 Motor. The downtube to has been designed to maximise strength and rigidity whilst providing easy access to remove the internal battery for charging or transportation. The Megawatt is offered in three specifications; Comp, Elite or Factory, to suit your riding needs and budget. Please see individual spec’s for full details. The Factory and Elite use a 630Wh Shimano battery, whilst the Comp uses a 504Wh battery. Both battery sizes will fit in each model with a secure and easy to flip mount system in all models. All bikes include a Shimano battery charger and adaptor to allow both on bike and off the bike charging using either the Euro or UK charging cables included.

Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result the specification may differ from those shown in the images. Please refer to the specification table for accurate information.

Intended Use: All Mountain/ Enduro/ DH
Available in Sizes Small to XXL
170mm of Rear Travel
Shimano EP8 Drive System
Full Custom Triple Butted and Hydroformed 6061-T6 Aluminium, Including Forged Aluminium parts.

Material    Fully Custom Triple Butted and Hydro-Formed 6061-T6 Aluminium Including Forged Parts
Fork Travel    170mm
Axle to Crown    582mm
Fork Offset    44mm
Rear Travel    170mm
Wheel Size    29" Front /27.5" Rear
Max Tyre Size    2.6"
Recommended Shock Sag (Measured seated)    30-35%
Shock Size    230x62.5mm
Shock Hardware F    25x8mm
Shock Hardware R    30x8mm
Sizing    S/M/L/XL/XXL
Headtube    56-66mm Tapered Semi Intergrated
Headset    ZS56-28.6 / ZS66/40 (1.5"" Tapered) or ZS56-28.6 / ZS66/46 (1.8"" Tapered) Requires cable routing through top cap
Bearings Required    4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA
Seatpost    31.6mm
Seat Clamp    34.9mm
Motor System    Shimano STEPS EP8, 250W, 85Nm
Rear Hub    148x12mm (Boost)
Rear Axle    SRAM UDH Stealth M12x1.0 180mm (Thread length 13mm)
Chain Guide    Shimano EM800 drive unit mount
Brake Mount    180mm Direct Post
Protection    3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery Door