Ibis Ripley

The Ibis Ripley is a snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike that is equally happy, popping off bonus lines as it crushes all-day epics.

Its combination of modern geometry, a stiff, lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel means it’s equally happy popping off bonus lines as it is crushing all-day epics.

Pike Select combines the DebonAir™ spring with the Charger™ RC damper, perfect for any trail junket you have planned. As a bonus, we included race-proven Maxima Plush fluid to help reduce friction, silence noise, and keep things running smooth ride after ride.

Features

New Maxima Plush damping fluid reduces friction and silences damper noise.
New graphics.
Charger™ RC damper featuring low speed compression adjust.
Highly tunable DebonAir™ spring offers a coil-like consistent feel throughout the travel.

The Float DPS’ lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch help conserve energy for when you need it most.

The SHIMANO DEORE FC-M6100-1 crank features an entirely new construction, using direct mount chainrings, special gear tooth profile for improved chain retention, and a 178 mm Q-factor that is compatible with 148 mm O.L.D. frames.

The sleek metallic colour shift DEORE crankset comes in single-only (1x12) configuration for drivetrain simplicity. It features the same DYNAMIC CHAIN ENGAGEMENT+ technology as XTR, DEORE XT and SLX cranksets, which with its narrow/wide tooth profile is key to the improved chain retention, smoothness and quietness of the drivetrain. For secure and fast mounting of the chainring, the crank is equipped with a direct mount system, making chainring changes a breeze.

Features

• Superior chain retention for smoother riding even over rough terrain
• DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention
• More maneuverability and aggressive riding realized
• For wide 148 mm O.L.D. and 55 mm chainline
• Direct mount chainring

Specification

• Mounting system: Direct mount
• Gear options: 30 T, 32 T
   

The all-new SHIMANO DEORE M6100 rear derailleurs deliver advanced shifting performance with decreased tension in the low gear position. Larger 13T pulleys increase efficiency and chain management while compatibility with SHIMANO's new 12-speed cassettes boosts range.

Features

• 1x12-speed SHIMANO SHADOW RD+ rear derailleur
• Fast and precise shifting for modern mountain biking
• Silent drivetrain in all gear positions
• Decreased rear derailleur and chain tension in low gear
• Bigger 13T pulley
• Stable drivetrain in rough terrain
• Low-profile design avoids damage from rocks
• Chain stabilizer reduces chain drop, slap and noise

Specification

MODEL NO: RD-M6100-SGS
SERIES: DEORE M6100 Series
Color: Series color
B-Axle_Hollow axle: Yes

Compatible chain: HG 12-speed
Direct attachment (Conventional): Yes
Fluoric coated link bushings: 7
Low sprocket_Max.: 51T
Low sprocket_Min.: 51T
Max. front difference: 0T
Pulley_Sunken type pulley bolt: Yes
Pulley_Teeth: 13T
Pulley cage: SGS
Rear speeds: 12
Top-Normal spring type_SHADOW RD+: Yes
Top sprocket_Max.: 10T
Top sprocket_Min.: 10T
Total capacity: 41T

With its BEAM SPIDER construction, the new SHIMANO DEORE M6100 12-speed cassette shaves weight while increasing SHIMANO's MTB gearing range another gear. Using SHIMANO's new MICRO SPLINE freehub body and HYPERGLIDE+ tooth profile, the 10-51T cassette delivers advanced shifting performance.

Features

• Trickle down technologies at its best
• HYPERGLIDE+ provides fast and smooth shifting
• BEAM SPIDER construction cuts weights and boosts stiffness
• 10-51T wide range 12-speed gear combination

Specification

• MODEL NO: CS-M6100-12
• SERIES: DEORE M6100 Series
• Combination: 10-12-14-16-18-21-24-28-33-39-45-51T
• Combination name (Group name): 10-51T
• Compatible chain: HG 12-speed
• Speeds: 12
• Type: HYPERGLIDE+

SHIMANO's RAPIDFIRE PLUS DEORE shift lever delivers light and responsive shifting for improved control out on the trail.

Features

• Quick and easy shifting
• Quicker lever access and light operation
• Shifts max. 3 gears at a time (Main lever)
• Easily-visible gear position indicator option improves shifting control

Specification

• MODEL NO: SL-M6100-R
• SERIES: DEORE M6100 Series
• Color: Series color
• Clamp band: Yes
• Compatible RD Type: MTB 12-speed
• Max. multiple shifts (Main lever/ rear): 3
• Optical Gear Display: Yes
• Optical Gear Display_Without: Yes
• Rear speeds: 12
• Recommended SL outer cashing: OT-SP41
• Release function_2-Way release: Yes
• SL cable adjust: Yes
• Shifter type: RAPIDFIRE PLUS

Aeffect is a new generation of Affordable All mountain equipement by Race face. The Aeffect bars comes in the new 35mm bar/stem standard. Forged and machined from 6061 Aluminium. 780x20 Rise.

Aeffect is a new generation of Affordable All mountain equipement by Race face. The Aeffect stem comes in the new 35mm bar/stem standard. Forged and machined from 6061 Aluminium.

Single lock-ring design with the staying power of dual lock-ring.  A taper-lock core uses an internal sleeve that narrows towards the last 38mm (1.5”) of the grip, effectively clamping onto the end of the bar to eliminate twisting.

Flared closed end for comfort, feel and security.  8mm (0.3”) of rubber with a subtle mushroom profile on the tip resists scuffing, provides comfort and adds an intuitive feel for the bar end.  (We also found it adds a healthy dose of forgiveness when clipping trees on tight trails!)

Long grip length and waffle knurl for maximum control.  A generous 125mm (4.9”) grip length (excluding lock-ring) allows plenty of room to reposition hands on differing terrain and long rides.  The moto-knurl pattern gives just the right balance of feel and grip in all conditions.

Legendary Hope headset - UK made with stainless bearings and inclides Hope Head Doctor top cap assemby.

Rubber sealed cartridge type, stainless steel bearings and additional 'O' ring seals in the cups to ensure years of maintenance free running. It's strong enough for downhill use, yet still light enough for cross-country. Bearing Type: Sealed stainless steel cartridge type. Cups: 2014 aluminium.

The Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated.)The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again.

The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that the Ascend Dropper is ideally suited for those using a 1x chain ring set up; without a front derailleur. However, a paddle style shifter is available aftermarket for those who want to use the Ascend dropper post with a front derailleur and shifter.

The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point.

Features:

• Material: AL7075-T651; Finish: Sand Blasted and Hard Anodised Black
• Bar mounted shifter style remote lever and Cable operated internal routing
• Linkage mechanism eliminates any outer cable pull
• Zero Offset one piece head/upper shaft with micro adjust clamp
• Diameter: 30.9mm or 31.6mm; Length: 498mm; Travel: 170mm
• Rider Weight: Min: 50-55kg; Max: 120kg
• Weight (31.6mm- exc cable and shifter): 595g
• Cable Length: 1.5m
• Warranty: 2 Years
• Remote Adjuster: Yes 
• Dropper: Yes 

The Volt is the next evolution in WTB saddles. Thin Line style compact padding borrowed from the Silverado and Devo compliment subtle curves and a melange of popular features from several of our saddles. A slight whale tail and gentle drop to the nose provide something to push against while not limiting riders to one seating position. This saddle has enough padding for all-day riding comfort yet scant enough weights for XC competition gaining it endless acclaim and popularity among riders.
 

SPECIFICATIONS:

RAIL: Cromoly
COLOUR: Black (Silver accents)
WEIGHT: 297g 
DETAILS: Synthetic Cover, Flex-tuned shell and Standard Padding

Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink™ lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency and modulation.

The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings.

Features

• Proprietary design ensures smooth shifting and strength
• Extended inner plate improves chain engagement and retention
• Shorter shift times and less pedaling shock
• Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings

Specification

• MODEL NO: CN-M6100
• SERIES: DEORE M6100 Series
• Average weight: 252
• Remarks: QUICK-LINK
• Chromizing treatment link pin: Yes
• Pin link plate: Grey
• Roller link plate: Brown
• Type: HG 12-speed
• E-Bike RD system compatible: Yes

No Chain Device Fitted

No Extras Included

Add toolkit, straps and other emergency kit on your bike rather than in a heavy backpack.

Extras included:

Oneup Components EDC Toolkit

Backcountry Research Straps - Used by EWS Champ Ritchie Rude.

The Hope Fortus 30 SC Wheel Set is a lightweight and durable choice for cross-country, trail, and all-mountain riding. Featuring a 30mm internal width rim and tubeless-ready design, these wheels provide excellent support for wider tires and improved traction on rough terrain. With Hope's reliable Pro 5 hubs and a weight of only 1750g, the Fortus 30 SC is a high-performance option for riders looking to elevate their riding experience.

Wheels machine built and hand finished in Barnoldswick
Built with Pro 5 32h hubs  (J-bend only)
Centrelock or 6 Bolt disc fitment 
Optimised rim profile suitable for 2.4” - 2.8” tyres
Tubeless compatible (Valve and Tape supplied)
Available in 26”, 27.5” and 29”
100mm and 110mm Boost front wheel options available
135/142mm, 148mm Boost, 150mm & 157mm rear wheel options available
Shimano Aluminium, Shimano Steel, MicroSpline and Sram XD freehub body options available
32mm Tape, Valve and wipe included for Tubeless setup
Welded 6061 T6 Aluminium rim with eyelets
Black Sapim Race stainless steel double butted spokes built with silver brass nipples
Increased engagement from 44 to 108 with a new offset 6 pawl freehub design
Hub available in Black, Silver, Blue, Orange, Purple and Red
Internal width: 30mm, External width: 35mm
Profile depth: 23mm
Rim ERD: 26” - 530mm/27.5” - 555mm/29” - 593mm

More speed thanks to a tread pattern optimized for rear use and providing excellent performance and maximum progressivity.
More grip thanks to a new GUM-X3D design combining grip, traction and performance.
More strength thanks to the strong, lightweight "Gravity Shield" 3x33 TPI casing designed for rear-mounted Enduro riding and "Pinch Protection" on the bead to increase rigidity and minimize pinch flats.