Bike Parts / Wheels / Rims GO BACK

WeAreOne The Deal DH Carbon Rim - 29" - 32-Hole

We Are One Deal Carbon - World Cup Proven DH Rim

The We Are One Deal is built for the clock. Where the Triad focuses on Enduro efficiency, the Deal is reinforced with a significantly heavier carbon layup and advanced ZRT composite films to survive the massive G-outs and rock strikes found on tracks like Fort William or Mont-Sainte-Anne. It is arguably the most resilient rim We Are One has ever produced.

World Cup Performance

The Deal is optimized for Precision and Confidence. By utilizing the sinuous Convergence profile, We Are One has achieved a unique balance: high lateral stiffness for pinpoint accuracy in high-speed berms, paired with a tuned vertical compliance that reduces trail chatter. This "dampened" feel is a secret weapon for DH racers, as it significantly reduces arm pump and hand fatigue over long, brutal race runs.

The We Are One Deal is the ultimate gravity-focused rim in the Convergence lineup, specifically engineered for World Cup Downhill (DH) racing. It is the direct successor to the legendary Strife, designed to handle the most violent compressions and square-edge hits on the planet while maintaining the "quiet" and dampened ride quality that defines the Convergence series.

Our Wheelbuilders' opinion:

For a professional DH setup, the Deal rims are most commonly paired with Industry Nine Hydra or DT Swiss 240/350 hubs (specifically the DEG versions with DF upgrade). Because DH bikes generate immense lateral forces, we strongly recommend using Sapim Race or DT Competition 2.0/1.8 double-butted spokes to ensure the wheel stays true even after a season of bike park laps.

CHOOSE SIZE

29" - 32-Hole

27.5" - 32-Hole

Available to order

£615.00

ADD TO ORDER

e: / t: 01323 737320

click here to see finance examples or £46.08 per month

FINANCE OPTIONS

Consumer credit services are only available to over 18s and subject to status

To see how much this would cost on finance enter Deposit or use slider below

10%

43%

USE THE FINANCE BUTTON AFTER CHECKOUT TO APPLY FOR FINANCE

Months	6	9	10	12	24
Purchase Cost	£615.00	£615.00	£615.00	£615.00	£615.00
APR	0.00%	0.00%	0.00%	0.00%	7.90%
Deposit %	10.08%	10.08%	10.08%	10.08%	10.08%
Deposit amount	£62.00	£62.00	£62.00	£62.00	£62.00
Loan amount	£553.00	£553.00	£553.00	£553.00	£553.00
Pay per month	£92.17	£61.44	£55.30	£46.08	£24.92
Total payable	£615.02	£614.96	£615.00	£614.96	£660.08

THE DETAIL

Convergence Technology: The wavy rim bed ensures perfect 7.5-Degree nipple alignment, eliminating the "point loading" that causes spoke failure in high-torque DH situations.
DH-Specific Laminate: Locally reinforced in critical impact zones, making it roughly 32% stronger against direct hits than previous generations.
Mullet-Ready: Available in both 29" and 27.5" to suit modern mixed-wheel DH race bikes.
Superior Energy Dissipation: The shallow 18.5mm depth (on the 29") allows the rim to deform slightly under extreme loads rather than cracking, essentially acting as a secondary suspension.
No-Questions Lifetime Warranty: If you case a massive jump or smash a rock and crack the rim while riding, We Are One will replace it for free.

SPECIFICATIONS

Specification	Detail	Notes
Material	Twill & ZRT Carbon Fiber	Highest strength layup in the WAO range.
Wheel Sizes	29" and 27.5"	Designed for full 29er or Mullet DH setups.
Internal Width	29mm (29") / 28mm (27.5")	Optimised for 2.4"�2.6" DH tyres.
Rim Depth	18.5mm (29") / 20.5mm (27.5")	Engineered for impact deformation/damping.
Weight (29")	618g	Robust weight reflecting its DH durability.
Weight (27.5")	612g	Extremely tough for high-speed rear hits.
ERD	604mm (29") / 562mm (27.5")	Center-drilled for maximum stability.
Hole Count	32h Only	Maximises wheel stiffness and durability.
Profile Design	7.5? Angular	Convergence sinuous nipple bed.
Manufacturing	Kamloops, BC, Canada	Race-proven and hand-laid in North America.

Specification	Detail
Material	Twill & ZRT Carbon Fiber
Wheel Sizes	29" and 27.5"
Internal Width	29mm (29") / 28mm (27.5")
Rim Depth	18.5mm (29") / 20.5mm (27.5")
Weight (29")	618g
Weight (27.5")	612g
ERD	604mm (29") / 562mm (27.5")
Hole Count	32h Only
Profile Design	7.5? Angular
Manufacturing	Kamloops, BC, Canada

Specification	Notes
Material	Highest strength layup in the WAO range.
Wheel Sizes	Designed for full 29er or Mullet DH setups.
Internal Width	Optimised for 2.4"�2.6" DH tyres.
Rim Depth	Engineered for impact deformation/damping.
Weight (29")	Robust weight reflecting its DH durability.
Weight (27.5")	Extremely tough for high-speed rear hits.
ERD	Center-drilled for maximum stability.
Hole Count	Maximises wheel stiffness and durability.
Profile Design	Convergence sinuous nipple bed.
Manufacturing	Race-proven and hand-laid in North America.